Basic Info.
Certification
CE, ISO 9001:2008
Packaging
25kg Per Woven Bag
Composition
Organic Modified Bentonite
Exterior
Milky White to Grey White Powder
Moisture Content (%)
Less Than or Equal to 3.50
Dry Powder Fineness (-200 Mesh)
More Than or Equal to 95.0
Viscosity
More Than or Equal to 2.5
Transport Package
Brown Paper Bag
Specification
Organic modified bentonite
Product Description
HL Series of Organic BentoniteHL series of organic bentonite is a kind of important fine chemical raw materials. Its oil-tend characteristics makes it easily form a thixotropic gels in organic solvents,it has the properties of anti-settling,thickening,anti-sagging and thixotropy.lt has a wide range for polarity of solvent and temperature application.Our organic bentonite is widely used in paint,ink,high-temperatureLubricating grease,sealant,oil drilling,precision casting,adhesive,plastic,asphalt,petroleum additives and other chemical industry,it is a kind of good thickening agent,stabilizer,anti-settling agent,rheology modifiers.HL Series Organic Bentonite Use MethodHL series organic bentonite is made by excelent bentonite with the processing of highly purified, modied and ion exchange into organic covering agent, it is a sheet stucure prouct, if you want the organc bentonite to play a better perfomance, you need to separate its shee-structure as much as possible. This proess usually needs to be provided with mechanical energy, chemical energy and heat energy.Use Method:
Dry powder method:Dry powder method is that add the dry powder directly into the system during the prodution process, it doesn't need the polar activator.Pre-gel Method:For por wetability resin systems (such as epoxy polester, short oil alkyd resin etc.) it is better to use HY seies organic bentonite by pre gel.(1) composed of pre gel: solvent 87%, organic bentonite 8-10%, polar activator 3-4%.(2) preparation of pre gel: solvent and organic bentonite (mixe 10min lully etabilty then add the polar activator (stirring for 5min,full expansion).Product Catalog| Catalog | Type | Main ingredients | Physical state | Nonvolatility% | Level of shear force | Suggested dosage | Pre gel | Polarity of application system |
| Organic bentonite | HL-06C | Organic modified bentonite | Power 200 mesh | 100 | high | 0.2-2.5% | suggest | Medium-low |
| Organic bentonite | HL-08C | Organic modified bentonite | Power 200 mesh | 100 | high | 0.2-2.0% | suggest | Medium-low |
| Organic bentonite | HL-19B | Organic modified bentonite | Power 325 mesh | 100 | high | 0.15-2.0% | can | Medium-low |
| Organic bentonite | HL-29B | Organic modified bentonite | Power 325 mesh | 100 | middle | 0.15-2.0% | no need | Medium-low |
| Organic bentonite | HL-19D | Organic modified bentonite | Power 325 mesh | 100 | middle | 0.15-2.0% | no need | Medium-high |
| Organic bentonite | HL-29D | Organic modified bentonite | Power 325 mesh | 100 | middle | 0.15-2.0% | no need | Medium-high |
| Water-borne bentonite | SX-90 | Purification, Modification and High Purity | Power 200 mesh | 100 | high | 0.2-2.0% | suggest | Water-borne syestem |
| Water-borne bentonite | SX-100 | Purification, Modification and High Purity | Power 200 mesh | 100 | high | 0.2-2.0% | suggest | Water-borne system |
| Composition | Organically modified bentonite |
| Exterior | Milky white to grey white powder |
| Moisture content (%) | ≤3.50 |
| Fineness (-200 mesh) | ≥95.0 |
| Viscosity | ≥2.5 |
Architectural coating
Industrial coating
Wood primer
Printing ink
Other systems such as unsaturated polyester systemMain characteristicsEffective provision of viscosity at low shear in the systemGood thixotropic propertiesPreventing Pigment and Filler Settlement during StorageIt can prevent the layering of coatings and the precipitation of supernatant liquorGood batch stabilityHigher cost performanceUsage and dosage It is suggested that it should be added in the grinding stage. The specific production process is as follows:Prerequisites: high-speed dispersion- Resin/solvent (Pre mixing)
- HL-06C Organic Bentonite(high-speed dispersion for 10 minutes)
- Polar activator(high-speed dispersion for 5-10 minutes)
- Surface active agent(If it exists)
- Pigments(Grinding to required fineness)
- Paint correction
Types of HL-06C Polar ActivatorMethanol/water(95/5) 30%-35%Ethanol/water(95/5) 30%-40%Propylene carbonate(95/5) 40%-50%It is suggested to use polar activated carbon containing 5% water to achieve the best activation effect.HL-06C prepared pregel can get the best performance under full dispersion. It is suggested that HL-06C should be added to solvent-based coatings under the condition of high speed dispersion, and the best anti-sagging and anti-sinking effect can be obtained after full activation.HL-06C can also be added directly in the process of using. After high-speed dispersion, the best anti-sagging and anti-sinking effect can be obtained.DosageThe amount of HL-06C added depends on the type of organic, the degree of thickening and other rheological properties.The use of HL-06C is 0.2%-2.5% of the weight ratio of the whole system. The optimum dosage must be determined through the experimental process.Efficient dispersing equipment and technology can better optimize the performance of HL-06C, reduce the effect of usage, and achieve maximum economic benefits.Accurate dosage should be determined in order to obtain the best effect.FactoryEquipmentExhibition
HELENBO FAQ1)Are you the factory or the trading company?
We are the factory.For more information,pls visit our website:http://hlb-organobentonite.en.made-in-china.com
2)What' the payment terms:
a.30% deposit before production,70% balance money before shippment by TT
b.100% T/T
c.L/C at sight
d.Western Union
3) How about the delivery time:
7 days according to the different quantity.
4) How about the sample?
Pay by customer.
5) How about the customer's own logo?
We can produce according to customer's requirement.
6) When will the customer receive our reply.
We will reply you within 24 hours
7) What's our company's advantage?
We are the professional factory of organic bentonite.Competitive price,Best quality,Quick delivery time and Best service.
Address:
Industrial Area of Liqiao, Xuanzhou City, Anhui Province. China
Business Type:
Manufacturer/Factory
Business Range:
Metallurgy, Mineral & Energy
Company Introduction:
Our company offers variety of bentonite products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
Our scope of business: Coating/drilling/ink/grease/mold/sealant grade bentonite
){kind=link}